Polaris Single Pipe Exhaust
Single Pipe Set
This SLP Single Pipe Set reduces weight by 5.5 lbs and delivers an additional 7.6 horsepower peak with good midrange gains, which equates to crisp, clean, throttle response and quicker acceleration with more top-end speed on the trail
In the deep snow this added horsepower and weight loss gets you up on the snow quicker and allows you to climb higher and boondock better
A lot of time and effort has gone into developing this ceramic coated pipe for optimum horsepower, running consistency, and reliability. SLP found that it was necessary to add a small heat shield to the pipe that is about half the size of the stock heat shield. This heat shield was needed to bring the pipe temperature up quickly for maximum running consistency
SLP tested and passed SAE J-2567 stationary sound test below 88 decibels
Era 2014 Silencing Technology
This pipe set will require additional fueling and SLP recommends the use of a DynoJet Power Commander V or PCFC Fuel Controller with SLP map
Also recommended is a High Flow™ Intake Kit and, if running in deep powder conditions, the SLP Powder Valves™
Some clutching changes recommended
Fitment:
Single Pipe Set
This SLP Single Pipe Set reduces weight by 5.5 lbs and delivers an additional 7.6 horsepower peak with good midrange gains, which equates to crisp, clean, throttle response and quicker acceleration with more top-end speed on the trail
In the deep snow this added horsepower and weight loss gets you up on the snow quicker and allows you to climb higher and boondock better
A lot of time and effort has gone into developing this ceramic coated pipe for optimum horsepower, running consistency, and reliability. SLP found that it was necessary to add a small heat shield to the pipe that is about half the size of the stock heat shield. This heat shield was needed to bring the pipe temperature up quickly for maximum running consistency
SLP tested and passed SAE J-2567 stationary sound test below 88 decibels
Era 2014 Silencing Technology
This pipe set will require additional fueling and SLP recommends the use of a DynoJet Power Commander V or PCFC Fuel Controller with SLP map
Also recommended is a High Flow™ Intake Kit and, if running in deep powder conditions, the SLP Powder Valves™
Some clutching changes recommended
Fitment:
| Vehicle Type | Model | Years |
|---|---|---|
| Snow | Polaris 800 INDY SP | 2014-2016 |
| Snow | Polaris 800 INDY SP LE | 2014 |
| Snow | Polaris 800 PRO-RMK 155 | 2013-2016 |
| Snow | Polaris 800 PRO-RMK 155 3in. | 2016 |
| Snow | Polaris 800 PRO-RMK 163 | 2013-2016 |
| Snow | Polaris 800 PRO-RMK 163 3in. | 2016 |
| Snow | Polaris 800 RMK 155 | 2014-2016 |
| Snow | Polaris 800 RMK Assault 155 | 2013-2015 |
| Snow | Polaris 800 RMK Assault 155 LE | 2014 |
| Snow | Polaris 800 Rush | 2013 |
| Snow | Polaris 800 Rush PRO-R | 2013-2014 |
| Snow | Polaris 800 Rush PRO-R LE | 2014 |
| Snow | Polaris 800 SwitchBack | 2013-2014 |
| Snow | Polaris 800 SwitchBack Adventure | 2014 |
| Snow | Polaris 800 SwitchBack Assault 144 | 2013-2016 |
| Snow | Polaris 800 SwitchBack Assault 144 TD Series LE | 2016 |
| Snow | Polaris 800 SwitchBack Assault LE | 2014 |
| Snow | Polaris 800 SwitchBack PRO-R | 2013-2014 |
| Snow | Polaris 800 SwitchBack PRO-R LE | 2014 |
USD : 92.69
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
